Assembly & Installation · Lawrence, KS

Washer & Dryer Installation in Lawrence, KS — Professional Service

Washer and dryer installation in Lawrence, KS. Hoses, standpipe drain, leveling, stacking kits and rigid metal dryer venting installed and tested.

877-519-9702

Call for a free estimate — no obligation

Free Estimates

Written Price First

Handyman kneeling at a stacked washer and dryer connecting the vent with foil duct, blue and red supply hoses and a power cord visible on the wall, in a Lawrence, KS laundry room

Same-Day Estimates

Upfront Pricing

Mon–Sat Availability

About This Service

Expert Washer & Dryer Installation in Lawrence, KS

Washer and dryer installation in Lawrence typically runs $165 to $260 for the pair, and the part that gets skipped in a rushed installation is the one that matters most for safety: the dryer vent. A dryer moves a large volume of hot, lint-laden air, and every foot of duct is a place for that lint to collect. Lint in a restricted vent is a leading cause of dryer fires. So the vent, not the machine, is the installation.

Foil accordion duct is the wrong answer, though it is what comes in the box with a lot of hookup kits. Its ridges snag lint, it crushes behind the dryer, and it burns. Rigid or semi-rigid metal duct has a smooth interior and holds its shape. Joints are taped, never screwed, because screw tips catch lint. Most manufacturers allow around 35 feet of run with five feet deducted for each 90-degree elbow, so a longer or more twisting run dries slowly and clogs faster.

Lawrence basements make the vent a real design question. In Old West Lawrence, laundry often lives in a basement enclosed by thick native-limestone walls, and getting a vent outside means passing above the masonry through the rim joist or core-drilling through it. Runs there tend to be long. We measure the run against the limit and choose the exit point before we set the dryer, because a vent that cannot reach the outside is the real constraint on a basement laundry, not the machine.

On the water side, a washer gets new braided stainless hoses on the shutoffs, and its drain hose sits in a standpipe at the right height with a loop that prevents siphoning. Feet are leveled so the machine does not walk, and stacked units are locked together with the manufacturer's kit.

We handle washer and dryer installation, hoses and standpipes, stacking kits, rigid dryer venting and old unit haul-away. New gas piping and 240 volt circuits are routed to licensed partners. Call 877-519-9702 for a free washer and dryer installation estimate.

Braided Hoses & Standpipe

Leveling & Stacking Kits

Rigid Metal Dryer Venting

Electric & Gas-Dryer Coordination

Get a Free Estimate

Call us directly for a fast, no-obligation estimate on your washer & dryer installation project.

877-519-9702

Mon–Fri 7am–6pm · Sat 8am–2pm

Written estimate before work starts

Our Process

How We Handle Washer & Dryer Installation

Check Hookups, Vent Path and Space

Water valves, standpipe, outlet type and the vent route are checked, and the vent length is measured against the manufacturer limit.

Connect Water and Drain

New braided stainless hoses go on the shutoffs, and the drain hose is set into a standpipe at the right height, with a loop to prevent siphoning.

Vent With Rigid Metal, Not Foil

Dryer venting uses rigid or semi-rigid metal duct, taped and not screwed at the joints, with the fewest bends and a straight run to the outside.

Level, Stack and Test a Full Load

Feet are leveled, stacked units are secured with the kit, and a full load of each runs to confirm no leaks, no walking and full drying.

FAQ

Washer & Dryer Installation Questions Answered

Common questions from Lawrence homeowners about our washer & dryer installation service.

Still have questions?

Call us — no forms, no queue. 877-519-9702

How much does washer and dryer installation cost in Lawrence?

Installing a washer and dryer pair typically runs $165 to $260. Old unit haul-away adds $25 to $60 per appliance. Extending or replacing dryer venting, or adding a standpipe and shutoffs, costs more.

Why should I never use foil accordion duct for a dryer vent?

Its ridges trap lint, it crushes easily, and it is a fire hazard. Rigid or semi-rigid metal duct has a smooth interior, holds its shape, and is the safe way to vent a dryer.

How long can a dryer vent be?

Most manufacturers allow around 35 feet of straight duct, with about five feet deducted for each 90-degree elbow. A long, bendy run dries slowly and collects lint, so shorter and straighter is always better.

Do you install gas dryers?

Electric dryers, and setting a gas dryer next to an existing gas connection, are within our scope. New gas piping and gas connections that require a licensed plumber are routed to a partner.

How is dryer venting handled in the older basements of Lawrence homes?

Carefully. In Old West Lawrence, laundry often sits in a basement enclosed by thick native-limestone walls, so the vent has to get out through the rim joist above the masonry or through a core-drilled opening, and runs tend to be long. We measure the run against the 35-foot limit and choose the exit before setting the dryer, since a vent that cannot get outside is the real limit on a basement laundry.

Pricing Guide

Washer & Dryer Installation Cost in Lawrence, KS

Washer and dryer installation in Lawrence typically runs: washer and dryer pair set, connected and tested $165–$260; stacking kit installation $55–$120; new rigid metal dryer vent run to an exterior wall $150–$420; standpipe and washer supply valve installation $140–$340.

Core-drilling through masonry for a vent runs $120–$300. Haul-away runs $25–$60 per unit. Gas and 240 volt work is routed to a licensed partner. Free estimates. Call 877-519-9702.