Plumbing · Lawrence, KS

Shut-Off Valve Replacement in Lawrence, KS — Professional Service

Shut-off valve replacement in Lawrence, KS. Seized angle stops, leaking valves and hose bibs replaced with quarter-turn valves, so water can be shut off when it matters.

877-519-9702

Call for a free estimate — no obligation

Free Estimates

Written Price First

Handyman in gloves using two wrenches on a copper supply line beneath a sink with a bucket catching drips and a new brass ball valve on the floor in a Lawrence, KS kitchen

Same-Day Estimates

Upfront Pricing

Mon–Sat Availability

About This Service

Expert Shut-Off Valve Replacement in Lawrence, KS

Shut-off valve replacement in Lawrence typically runs $95 to $220 for an angle stop and $120 to $280 for a hose bib, and it is the plumbing job nobody thinks about until the day they urgently need it. A shut-off valve exists for one reason: to stop water when something goes wrong. A valve that will not turn, or turns without stopping flow, is not doing that job.

Older multi-turn valves fail in a predictable way. Mineral deposits build on the stem, the rubber washer inside hardens, and after years without being moved the valve seizes. Forcing one can snap the stem or crack the pipe behind it, turning an inconvenience into a flood. That is why we test each valve before relying on it, and why an old stop that has not moved in years is better replaced on your schedule than exercised in an emergency. The replacement is a quarter-turn ball valve, which has no washer to harden and shows at a glance whether it is open or closed.

Old West Lawrence gives this job a particular flavor. Many original plumbing systems there have no individual stops at the sinks and toilets at all, and the main gate valve in the basement has not been touched in decades and will not fully close. In that house, a small leak means shutting off the whole house at the street, or not at all. Adding a stop at each fixture and replacing a seized main is some of the most valuable plumbing work you can do on an older home, and it makes every future repair faster and cheaper.

Valve connection type matters. Copper, galvanized, PEX and CPVC each take a different fitting, and we match compression, threaded, sweat or push-fit to the pipe. A main valve may need the city's curb stop shut off first.

We handle angle stop and fixture valve replacement, quarter-turn upgrades, hose bib and sillcock replacement, and main valve service. Work that needs a city shut-off or new pipe runs is routed to licensed partners. Call 877-519-9702 for a free shut-off valve replacement estimate.

Angle Stop Replacement

Quarter-Turn Ball Valves

Hose Bib & Sillcock Valves

Main Valve Service

Get a Free Estimate

Call us directly for a fast, no-obligation estimate on your shut-off valve replacement project.

877-519-9702

Mon–Fri 7am–6pm · Sat 8am–2pm

Written estimate before work starts

Our Process

How We Handle Shut-Off Valve Replacement

Test Every Valve Before Relying on It

Each fixture stop and the main are turned to see if they move and actually stop flow. A valve that will not close is no valve at all.

Shut Water Off at the Right Point

The next valve upstream, or the main, is closed to isolate the work, and lines are drained so the joint can be cut or unscrewed dry.

Replace With a Quarter-Turn Valve

Old multi-turn stops are replaced with quarter-turn ball valves in the correct connection type for the pipe, whether compression, threaded, sweat or push-fit.

Pressure-Test and Show You Where It Is

The new valve is tested under full pressure, and you are shown exactly where each one is and how to shut it off.

FAQ

Shut-Off Valve Replacement Questions Answered

Common questions from Lawrence homeowners about our shut-off valve replacement service.

Still have questions?

Call us — no forms, no queue. 877-519-9702

How much does shut-off valve replacement cost in Lawrence?

Replacing an angle stop under a sink or behind a toilet runs $95 to $220 each. A hose bib or sillcock replacement runs $120 to $280. Main valve replacement depends on the type and location and may need a city curb-stop shut-off.

Why will my shut-off valve not turn?

Old multi-turn valves seize as mineral deposits build on the stem and the rubber washer inside hardens. Forcing a stuck valve risks snapping the stem or breaking the pipe, and that is why an old valve that has not moved in years is better replaced than exercised.

What is a quarter-turn ball valve?

A valve with a ball inside that rotates ninety degrees between open and closed. It has no washer to harden, so it does not seize the way older multi-turn stops do, and it is clear at a glance whether it is open or closed.

Where is my main water shut-off?

Usually where the water line enters the house, often in a basement, crawl space or utility room, or in a meter pit outside. Every household should know where it is before an emergency. If yours will not close, replacing it is worth doing now.

Do Old West Lawrence houses often lack fixture shut-off valves?

Many do. Original plumbing there frequently has no individual stops at the sinks and toilets, and the main gate valve in the basement has not been turned in decades and will not fully close. That means a small leak forces the whole house water off at the street or nowhere. Adding stops at each fixture and replacing a seized main is some of the most valuable plumbing work on an older house.

Pricing Guide

Shut-Off Valve Replacement Cost in Lawrence, KS

Shut-off valve replacement in Lawrence typically runs: angle stop under a sink or behind a toilet $95–$220 each; hose bib or sillcock replacement $120–$280; adding stops to a fixture that has none $140–$300; main shut-off valve replacement $220–$650.

Replacing a full set of fixture stops in a house typically runs $650–$1,600. Main valve jobs that need a city curb-stop shut-off are quoted separately. Free estimates. Call 877-519-9702.