Assembly & Installation · Lawrence, KS

Microwave Installation in Lawrence, KS — Professional Service

Microwave installation in Lawrence, KS. Over-the-range mounting, vent conversion, trim kits and cabinet cutting, anchored to studs and connected correctly.

877-519-9702

Call for a free estimate — no obligation

Free Estimates

Written Price First

Handyman holding an over-the-range microwave against the bottom of an oak upper cabinet while driving a mounting screw with a drill above a gas cooktop in a Lawrence, KS kitchen

Same-Day Estimates

Upfront Pricing

Mon–Sat Availability

About This Service

Expert Microwave Installation in Lawrence, KS

Microwave installation in Lawrence typically runs $145 to $260, and it is more of a carpentry job than an appliance job. An over-the-range microwave weighs sixty to eighty pounds and hangs eighteen inches or so above a hot cooktop. It hangs from a metal plate fastened to the wall studs and bolts through the bottom of the cabinet above, and the whole load sits on those fasteners. Drywall anchors do not qualify. Finding studs and hitting them is the core of the installation.

Clearances are set by the manufacturer. There is a minimum distance above the cooktop, usually 13 to 18 inches, and a comfortable height for using it, with the bottom edge about 66 inches from the floor. Every model has a paper template that marks the plate, the bolt holes and the cabinet cutouts, and following it precisely is what makes the microwave sit flush and level.

Venting is the choice that matters after installation. Recirculating models only filter grease and smoke and return the air to the kitchen. Ducted models send it outside, and they do it better. In West Lawrence subdivision kitchens, a ducted range hood is often already there, so swapping it for an over-the-range microwave can reuse the existing duct path if the microwave is convertible. The hood's mounting plate and cutout rarely match the microwave's, and the cabinet above usually needs a new hole for the power cord, which we cut cleanly.

Built-in and trim-kit installations, where a microwave sits in a cabinet opening with a frame around it, are their own set of measurements. Ventilation clearance and a nearby outlet are the two details that most often decide whether a unit will fit.

We handle over-the-range mounting, vent conversion, cabinet cutting, trim kits and countertop-to-built-in conversions. New electrical outlets and circuits are routed to licensed partners. Call 877-519-9702 for a free microwave installation estimate.

Over-the-Range Mounting

Vent Conversion

Built-In Trim Kits

Cabinet Cutting

Get a Free Estimate

Call us directly for a fast, no-obligation estimate on your microwave installation project.

877-519-9702

Mon–Fri 7am–6pm · Sat 8am–2pm

Written estimate before work starts

Our Process

How We Handle Microwave Installation

Check Clearance, Studs and Power

Height above the cooktop, cabinet depth, stud locations and an outlet in the cabinet above are checked, since a microwave is heavy and needs solid anchoring.

Mark and Cut Where Needed

The mounting template is transferred to the wall, and the cabinet above is cut for the vent or power cord as the model requires.

Mount to Studs and Set the Vent

The mounting plate is fastened to studs, the microwave is lifted onto it and bolted through the cabinet above, and the vent is set for outside exhaust or recirculation.

Connect Power and Test

Power is connected, the fan, light and heating are tested, and clearances and door swing are verified.

FAQ

Microwave Installation Questions Answered

Common questions from Lawrence homeowners about our microwave installation service.

Still have questions?

Call us — no forms, no queue. 877-519-9702

How much does microwave installation cost in Lawrence?

Mounting an over-the-range microwave typically runs $145 to $260, depending on whether there is an existing mounting plate and vent. Converting a vent, cutting a cabinet or moving an outlet adds to the cost. Countertop microwaves need no installation.

Does an over-the-range microwave need to be mounted to studs?

Yes. A microwave weighs sixty to eighty pounds and hangs from a wall plate and bolts through the cabinet above. Drywall anchors alone are not adequate, and studs must carry that load.

How high should an over-the-range microwave be mounted?

Most manufacturers specify a minimum of 13 to 18 inches above the cooktop, and the bottom of the microwave should be about 66 inches above the floor for comfortable use. The installation manual for your model sets the exact figures.

Can an over-the-range microwave vent outside?

Yes, through the wall or the roof, if the model is convertible and there is a path. Ducted venting removes cooking smoke and grease far better than recirculating models, which only filter and return the air.

Can I replace a range hood with a microwave in a West Lawrence subdivision kitchen?

Usually, and it is a common upgrade. Many builder kitchens there have a ducted hood that vents outside, so the existing duct path can often be reused for the microwave if the model is convertible. The hood's smaller mounting plate and cutout need checking against the microwave's, and the cabinet above usually needs a new hole for the power cord.

Pricing Guide

Microwave Installation Cost in Lawrence, KS

Microwave installation in Lawrence typically runs: over-the-range microwave with existing mounting plate $145–$210; new mounting with stud location and cabinet cutting $180–$260; vent conversion to outside exhaust $160–$420; built-in trim kit installation $150–$300.

Old microwave or range hood removal and haul-away runs $25–$60. New outlets and circuits are routed to a licensed electrician. Free estimates. Call 877-519-9702.