Siding · Lawrence, KS

Hardie Board Installation in Lawrence, KS — Professional Service

Fiber cement (Hardie) siding installation in Lawrence, KS for sections, additions and gable ends. Correct blind nailing, gapped joints and sealed cut edges, with whole-house jobs through licensed partners.

877-519-9702

Call for a free estimate — no obligation

Free Estimates

Written Price First

Two workers on scaffolding nailing gray fiber cement lap siding over house wrap beside a window, with stacked planks and a table saw, at a Lawrence, KS home

Same-Day Estimates

Upfront Pricing

Mon–Sat Availability

About This Service

Expert Hardie Board Installation in Lawrence, KS

Hardie board installation in Lawrence typically runs $2,200 to $7,500 for a section, gable end or addition, and it costs more than vinyl for reasons that come straight from the material. Fiber cement, the product sold under the Hardie name and by other makers, is a mixture of Portland cement, sand and cellulose fibers pressed into planks. It is much heavier than vinyl, cut and fitted on site, and demands more careful fastening. In exchange, it is one of the most durable sidings you can put on a Kansas house.

Hail is the argument that usually decides it. Vinyl cracks and punctures under large stones, thin aluminum dents, and wood is vulnerable in its own ways. Fiber cement generally survives hail that would wreck the alternatives, and it is noncombustible, rot-resistant and unappealing to insects. Newer subdivisions on the higher ground west of Kasold Drive have another factor working for it: young trees give little wind break, so the west and south walls take more direct hail and driven wind than a shaded older street does.

The installation is exacting. Planks are heavier, so framing and sheathing are checked first. They are fastened into studs at the manufacturer's spacing, blind-nailed where the design allows, and butt joints are flashed or gapped as specified rather than jammed together. Every field-cut edge is sealed, because a raw cut is the most absorbent part of the plank. Cutting also releases silica dust, so we cut with the correct blade and dust controls.

We handle fiber cement for sections, gable ends, additions and infill, along with wrap, flashing and trim. Whole-house re-siding is coordinated through licensed contractor partners. Call 877-519-9702 for a free fiber cement siding estimate.

Fiber Cement Planks

Hail & Fire Resistance

Blind Nailing & Gapped Joints

Sealed Cut Edges

Get a Free Estimate

Call us directly for a fast, no-obligation estimate on your hardie board installation project.

877-519-9702

Mon–Fri 7am–6pm · Sat 8am–2pm

Written estimate before work starts

Our Process

How We Handle Hardie Board Installation

Confirm the Wall Can Carry the Weight

Fiber cement is heavier than vinyl, so the framing, sheathing and any existing layers are checked before planks are ordered and hung.

Wrap, Flash and Set the Starter

A lapped weather barrier, head flashing and a level starter go on first, just as for any siding. Fiber cement does not forgive skipped flashing.

Blind-Nail and Gap the Joints

Planks are nailed into the stud line, 8 inch max spacing where required, with butt joints flashed or gapped to the manufacturer spec and never jammed tight.

Seal Every Cut Edge and Finish

Every field-cut edge is primed, joints are sealed as specified, and the factory finish is touched up or the full wall is painted.

FAQ

Hardie Board Installation Questions Answered

Common questions from Lawrence homeowners about our hardie board installation service.

Still have questions?

Call us — no forms, no queue. 877-519-9702

How much does Hardie board installation cost in Lawrence?

Fiber cement siding for a gable end, addition or single wall section typically runs $2,200 to $7,500 installed. It costs more than vinyl to buy and to install, because the planks are heavier and are cut and finished on site. Whole-house jobs are coordinated through licensed contractor partners.

Is fiber cement siding better than vinyl?

It is more durable against hail, fire, impact and pests, and it holds paint far longer than wood. It is also heavier, more expensive and more labor-intensive to install, and it does not flex the way vinyl does. Which is better depends on how long you plan to stay and how much weather the wall takes.

Does fiber cement siding really stand up to hail?

Far better than vinyl or aluminum. Vinyl cracks and punctures under large hail, and thin aluminum dents. Fiber cement generally shrugs off hail that would destroy other siding, which is a large part of why it is popular across eastern Kansas.

Why does fiber cement need special cutting and nailing?

Cutting it releases silica dust, so it is cut with the right blade and dust controls, or outdoors with a shear. It also has to be fastened into studs with the right nail at the right spacing, or it can crack or sag.

Is Hardie board a good choice for the open lots of newer West Lawrence?

Often. Newer subdivisions on the higher ground past Kasold tend to have young trees that offer little wind break, so siding there takes more direct hail and driven wind than a shaded older street does. Fiber cement is a reasonable answer to that exposure, particularly on the west and south walls that take the worst of it.

Pricing Guide

Hardie Board Installation Cost in Lawrence, KS

Hardie board installation in Lawrence typically runs: gable end or single wall section $2,200–$4,200; a small addition or a full wall $3,800–$7,500; pre-primed versus factory-finished plank, roughly $1.00–$2.50 per square foot difference; trim boards and corners $8–$16 per linear foot.

Field painting of a full wall runs $1,400–$3,200. Whole-house fiber cement re-siding through a licensed partner typically runs $14,000–$32,000+ depending on size. Free estimates. Call 877-519-9702.